 |
| Thanks Sue:-) |
SEW....
Yes, I'm still making aprons but I'm getting bored
with the same - o, same - o!
In the box of way cool stuff that Sue sent me a few months back
was this curtain valance.
 |
| Valance |
It was intact when I received it,
forgot to photo before the seam ripper attacked it.
It had a ecru lining and the ties were attached in the top hem.
Looked like the start of an apron to me.
I had some fat quarters that coordinated so I got to work.
The idea for this apron stemmed from a previous apron that
I miscalculated the width on.
Live and learn, AKA improvize!
The idea is to sew two different fabrics together making a tube, but rotate
the tube so the seams are shifted about 6".
So now you have part of the back showing on the front and
part of the front showing on the back.
I chose to put trouser pockets in the seams
as not to have any patch pockets distracting
from the vertical lines.
Directions are for this apron,
both are made the same, only I varied the rotation amount and
I didn't add a contrasting bottom strip to the first one,
and the photos are a combo of both projects.
Fabric,
Cut one each - Apron front/back 21” (side to side) x 17 ½” (waist to hem) (2 different fabrics).
Cut two - (1 for waistband 1 for trim at the bottom). (side to side) 21 ½ ” x 5” deep
Cut 4 trouser pockets from waistband fabric.
Grosgrain ribbon
With right sides together pin each of the four pockets to the apron front and back at the side seams, about 1 ½” to 2 ½" down from the top of waist.
Sew pockets to apron front and back on each of the sides in a ¼” seam.
Press seam toward pocket, pressing pocket out.
If you're going to add any trims, ribbons ETC., do it now!
With right sides together pin apron front and pockets to apron back and pockets at side seams, having raw edges even.
Sew apron front to apron back, (starting at the bottom) in a ½” seam. When you reach the pocket, continue sewing up the side seam about 3 ½” past the pocket. Stop, and with the needle in the fabric turn the apron around and sew back over first stitching stopping ½” from the pocket edge. Pivot and continue around pocket, pivoting again ½” from the pocket top edge. Sew straight across pocket top edge and pivot ½” again to continue finishing the side seam. With the needle still in the fabric, turn the apron around and sew back down the side seam over the first stitching 1 ½” past the pocket, spin around again and work yourself back to the top.
This is where it gets interesting.
You have the front and back sewn together at the side seams, with trouser pockets in either side
Rotate the front at the side seam towards the back 6”, which moves the back 6” to the front, and therefore moves the front 6” to the back. Now your pocket is moved in 6” which gives you 1 pocket 6” in from each side.
Depending on which way you rotate you can place the pocket for either a leftie or a rightie.
Once you have the rotation correct, press the sides to create new “side seams“.
Press original side seams towards the way you want the pocket to lay.
Since I chose to drop the pocket down from the waist area
1 ½’ to 2 ½ ”,
it kind of left the pocket top hanging in the breeze so to speak.
Typically, trouser pocket tops are encased/anchored within the waistband.
I just didn’t want them up that high.
My solution was to sew a button to the outside of the apron, through the pocket top to act as an anchor on each side of the apron. I used embrodiery floss for my thread.
Now, we have the top and bottom still open.
I chose to add a solid color waistband, and trim the bottom in the same.
Baste the front to the back at the top and bottom edges in a ¼“ seam.
Center the waistband to the top and stitch in a ½” seam.
(Remember we cut the waistband and trim ½” longer that the apron width).
Do the same for the bottom.
Press in the ¼” on each side of the waistband and trim sections, to the wrong side of the waistband and trim sections. Now press up ¼” on the lengthwise of the waistband and trim sections to the wrong side.
Fold this pressed edge over the waistband to cover the basting and pin. Stitch in place.
Do the same with the bottom edge.
Now we need to add the ties for the waist.
We left the sides open at the waistband, and bottom trim. Here we insert the ribbon ties.
Measure the opening at the waistband, mine was 2” so I used a 1 ½” wide grosgrain ribbon.
Length depends on how you tie, I like the ribbon to cross in back and tie in front, you decide.
Insert the ribbon into the waistband opening about 2”, align the ribbon to the waistband top edge and pin in place.
Starting at one top edge, topstitch a scant ¼” from the apron edge down the side, across the bottom and back up the other side. I triple stitched over the whole width/depth of the ribbon, at the waistband .
Finish off the ends of the ribbon by folding it twice to the inside and stitching the end down.
Viola, you now have a cool, unique apron.
I hope you like it.
Till next time,
Bonjour
P.S.
This is my design, for personal use only,
please do not reproduce or copy for commercial purposes.
