Up-cycling an old office chair

New sewing chair

Second hand store, office chair

I found this office chair at my local thrift store for $5.00.

 Pretty ugly wouldn't you say?

But I could see it's potential, a little spray paint, some new fabric

and I would have a great sewing chair.

I took the seat and backrest off, then spray-painted the frame  a gloss black.

Off came the old seat cover.

The foam cushion was still good so all I needed to do make a new cover.

Since the seat frame was metal I couldn't staple a new cover on

 so I opted to sew one.

I cut a rectangle of fabric, hemmed the edges to form a casing, 

 inserted some elastic, 

pulled the elastic tight to form the fabric around the seat and then tied it off.

Kind of like a shower cap.

The backrest was in two parts, front and back, held together with screws.

The leather cover was in good shape so I just covered over it.

I cut a rectangle of fabric for each piece.

Using some embroidery floss, I did a gathering stitch around the edges

of the rectangles, then gathered them up around each piece.

 I also stitched from top to bottom and side to side, 

(kind of like tying up a corset) to get it good and tight. 

After cutting off the extra fabric in the corners,

I screwed the two pieces back together and re-assembled the chair.

I like the vintage vibe of the old steel frame mixed with the modern fabric.

Vintage office chair

What do you think?

Till next time,

Bonjour